Mono Point Injection

Hi Guys,
My 405SR was converted from Carburetor setup to Monopoint injection system. This conversion is nice in a way as I get to use back my Xu9 engine which is still in good condition despite it had aready clocked 200000km. My Carb was leaky and looks like the way to rejuvenate it, conversion was the way to go. What is evident after the conversion was the fact that the idling is consistent while I save on fuel with more predictable power.

What I have "lost" was the Carby and the manifold, fuel pump, dizzy+ignition amp, flywheel,SR rpm meter, wire harness and ++.

What I have gained was ECU,Flywheel with speed sensor, Manifold + injector unit,fuel pump in the fuel tank,RPM meter,wire harness,O2 sensor,Map sensor ++

Here is the picture that might say it all.


Here is the birdeye view of the new setup.

regards